Pruitt MPD Mud Gas Separator
Managed Pressure Drilling Equipment
The Pruitt MPD Drill-Through Mud Gas Separator (MGS) has been designed from the outset to be used as a high-capacity atmospheric drill through MGS.
The MGS can also be configured for use as a pressurized 3-phase separator with the capability to handle solids discharge for UBD or 2-phase MPD operations. The vessel is equipped with nozzles (flanges) to facilitate installation of two 4” x 6” pressure relief valves, back-light sight glasses, level-control instrumentation, low and high level shut downs, flush pump system, and condensate skimming line.
Features
Pruitt MPD Mud Gas Separator
- Designed To Be Used As Either An Atmospheric Drill Through MGS or as a Pressurized Vessel Suitable For UBD or 2-Phase MPD Operations
- Vessel Incorporates All Necessary Flanges To Switch To Pressurized Operations
- Incorporates Diaphragm Sealed Pressure Transducers
SCADA Control & Monitoring
Technical Specifications
Pruitt MPD Mud Gas Separator
- Design Working Pressure 185 PSI [12.8 BAR]
- ASME VIII, Zone 1
- Maximum Wind Speed Loading Of 120 MPH [193 km/h]
- Dimensions: Vessel Transport, L-21 ft [6.4 m] X W-7.5 ft [2.3 m] X H-7.5 ft [2.3 m], Weight – 16000 lb [7257 kg] (Dry)
- Dimensions: Support Transport, L-16.5 ft [5.0 m] X W-7.5 ft [2.3 m] X H-7.5ft [2.3 m], Weight – 8500 lb [3855 kg]
- Dimensions: In Use, H-37.5 ft [11.4 m] X W-7.5 ft [2.3 m] X L-7.5 ft [2.3 m], Weight – 24500 lb [11113 kg]
- 12” 150 PSI Inlet and Gas Outlet
- 22 ft [6.7 m] Liquid U Seal For Atmospheric Operations
